• Welcome to Lyssos Enterprises!
  • +30 210 7106060
  • 6-8, Efklias Str, Piraeus, 185 38, Greece

Tango TX1 Gas Detector

The Tango® TX1, with a 2-year run time and DualSense® Technology, increases worker safety, regardless of bump test frequency, while reducing overall costs.

  1. DualSense Technology increases worker safety by using two sensors to detect the same gas
    Guaranteed for Life™ with replaceable sensors and batteries that extend the life of the instrument
    Optional AlarmAmp™ increases audible alarms to 110dB
    Acknowledgeable gas alerts

Overview

By wearing the Tango® TX1 Portable gas detector, your workers will be the safest single gas monitor users in the world. A 2-year run time and patented DualSense Technology increase worker safety, regardless of bump test frequency, while reducing overall costs.

  • Significantly increases worker safety – DualSense Technology ensures that, regardless of your current bump test policy, you will be significantly safer with the Tango than with any other single gas instrument on the market today. *
  • Longer battery life – Operates continuously in an “always-on” mode for two years. After the battery can no longer support instrument life, it can be replaced for another two years of continuous operation.
  • Louder instrument alarm – Alarms at 100dB at 10 centimeters making it twice the volume of Industrial Scientific’s GasBadge units and louder than any single gas instrument on the market. Alarm volume can be increased by about 10dB for higher-noise environments with the addition of the optional AlarmAmp™.

*Based on iNet® data including more than 2 million bump tests and 100,000 unique sensors.

Technologies

DualSense Technology uses redundant sensors to determine the concentration of the target gas in the atmosphere and reduce the risk of instrument failure. Two sensors of the same type in one gas detector help to give you the most accurate gas reading.

Specifications

SPECIFICATIONS

INSTRUMENT WARRANTY:

Guaranteed for Life™. Warranted for as long as the instrument is supported by Industrial Scientific Corporation (excludes sensors, batteries, and filters). CO and H2S sensors are warranted for 3 years. All other sensors are warranted for 2 years.

DISPLAY:

Segment liquid crystal display (LCD)

KEYPAD:

Two buttons

CASE MATERIALS:

Case top: Polycarbonate with a protective rubber overmold

Case bottom: Conductive polycarbonate

ALARMS:

Three strobe-emitting visual alarm LEDs (two red; one blue);

100 decibel (dB) audible alarm at a distance of 10 cm (3.94″); Vibration alarm

DIMENSIONS:

99 x 51 x 35 mm (3.9″ x 2.0″ x 1.4″)

WEIGHT:

126.0 g (4.4 oz.)

TEMPERATURE RANGE:

-40°C to +50°C (-40°F to +122°F)

HUMIDITY RANGE:

15%-95% Non-condensing (continuous)

SENSORS:

CO, CO/H2, H2S, NO2, SO2 – Electrochemical sensor technology

SENSOR MEASURING RANGES:

Carbon Monoxide (CO): 1 to 1,000 ppm in 1 ppm increments

Carbon Monoxide (CO/H2 low): 0.0 to 1,000.0 ppm in 1 ppm increments

Hydrogen Sulfide (H2S): 0.0 to 500.0 ppm in 0.1 ppm increments

Nitrogen Dioxide (NO2): 0.0 to 150.0 ppm in 0.1 ppm increments

Sulfur Dioxide (SO2): 0.0 to 150.0 ppm in 0.1 ppm increments

BATTERY:

3.6 V Primary lithium-thionyl chloride (Li-SOCl2); 1.5AH, 2/3AA; replaceable;
non rechargeable; always on; up to 2-year run time depending on operating conditions

DATA LOGGING:

3 months at 10-second intervals

EVENT LOGGING:

60 alarm events

CERTIFICATIONS

INGRESS PROTECTION:

IP66; IP67

-40°C TO +50°C (-40°F TO +122°F)

ATEX

Ex ia I Ma; Ex ia IIC T4 Ga;

Equipment Group and Category: I M1 and II 1G

CSA

Class I, Groups A B C D T4; Ex ia IIC T4

IECEx

Ex ia I Ma; Ex ia IIC T4 Ga

UL (C-US)

Class I, Groups A B C D T4; Class II, Groups E F G;

Class I, Zone 0, AEx ia IIC T4

INMETRO

Ex ia I Ma; Ex ia IIC T4 Ga

-20°C TO +50°C (-4°F TO +122°F)

China Ex

Ex ia IIC T4 Ga

CMA

Ex ia I Ma; H2S, CO

KC

Ex ia IIC T4

EAC

PO Ex ia I X; 0 Ex iX IIC T4 X

  

These specifications are based on performance averages and may vary by instrument.

Ordering Info

ORDERING INFORMATION

PART NUMBER

DESCRIPTION

INSTRUMENT CONFIGURATIONS

TX1-1

Tango TX1, CO

TX1-2

Tango TX1, H2S

TX1-4

Tango TX1, NO2

TX1-5

Tango TX1, SO2

TX1-G

Tango TX1, CO/H2low

Accessories

ORDERING INFORMATION

PART NUMBER

DESCRIPTION

ACCESSORIES

18109330-ABC DSX™ Docking Station for Tango TX1

  1. – DSX Mode:
    0 = DSX Standalone
    1 = DSXi Cloud-connected
    2 = DSX-L Local Server
  2. – Number of Gas Inlet Ports: 
    3 = 3 Ports
    6 = 6 Ports
  3. – Power Cord Type:  1 = North America, 2 = EU, 3 = AUS, 4 = UK

17154367

Replacement battery

18109171

Soft nylon case, Black

18109239

Soft nylon case, Orange

18109218

Dust barrier kit, 5 pack

18109230

Water barrier kit, 5 pack

18109238

CalCup and tubing kit

17120908

Belt clip

17154915-0

AlarmAmp™, Black

17154915-1

AlarmAmp™, Safety Orange

17154916

Black nameplate

17154917

Green nameplate

17154918

Yellow nameplate

17154919

Blue nameplate

17154920

White nameplate

*Accessto data from the iNet DS docking station requires a subscription to iNet oriNet InSite.

*DSX Docking Station Kits Include: Choice of Standalone or Cloud-connected 3-port DSX docking station, 116L calibration gas (appropriate mix) with demand flow regulator with iGas® pressure switch, North American power cord, USB storage device (Standalone only).

Downloads

Tango_SpecSheet_EN
Tango-TX1-Declaration-of-Conformity-17157458
Release Notes Summary – Tango TX1
GTK_Tango_poster_ 4X8-5
17154993-1-Tango-TX1-Product-Manual-EN